Intumescent Acoustic Sealant FiAM 600
600

Product Information

fischer FiAM is a single-component water-based acrylic emulsion that can provide fire resistance of up to 5 hours when used in both vertical and horizontal applications in construction joints and works. When exposed to fire, it reacts to form a highly insulating charcoal that slows heat transfer and provides a barrier to fire insulation. Tested to BS EN1366-3 and 4, UL 2079 and BS476-20, FiAM is also ETA approved and CE Marked. Prepared to be halogen and solvent-free, FiAM exhibits excellent slump properties and is designed to maintain the sound attenuation index of the structure.

Advantages

  • Water based
  • Low VOC
  • Mobility ± 25%
  • Excellent acoustic properties
  • Approved for unlimited linear blank length
  • Halogen and solvent free
  • Paintable and excellent slump properties

Scope of application

Applications
  • Metallic tubes: 6″ (159 mm)
  • Cable trays: 18″ x 2″ (450 x 50 mm)
  • Cable harnesses: 3″ (80 mm)
  • Linear joints: flexible and rigid wall structural elements
  • Joints between FCPS painted panel system
Construction materials
  • Flexible wall structures
  • Hard floor and wall structures
  • Masonry
  • Concrete
  • Wood
  • Steel
  • FCPS System
* You can find detailed information about building materials in the registration document.

Functionality

  • FiAM is a one-component, water-based acrylic emulsion.
  • It is fire resistant for up to 5 hours when used in both vertical and horizontal applications in construction joints and works.
  • When exposed to fire, it reacts to form highly insulating charcoal, which slows heat transfer and provides a fire insulation barrier.
  • It is suitably compatible with a variety of materials and is used in FCPS designed to seal large openings in fire-rated floors and walls.
Intumescent Acoustic Sealant FiAM 310

Product Information

fischer FiAM is a single-component water-based acrylic emulsion that can provide fire resistance of up to 5 hours when used in both vertical and horizontal applications in construction joints and works. When exposed to fire, it reacts to form a highly insulating charcoal that slows heat transfer and provides a barrier to fire insulation. Tested to BS EN1366-3 and 4, UL 2079 and BS476-20, FiAM is also ETA approved and CE Marked. Prepared to be halogen and solvent-free, FiAM exhibits excellent slump properties and is designed to maintain the sound attenuation index of the structure.

Scope of application

Applications
  • Metallic tubes: 6″ (159 mm)
  • Cable trays: 18″ x 2″ (450 x 50 mm)
  • Cable harnesses: 3″ (80 mm)
  • Linear joints: flexible and rigid wall structural elements
  • Joints between FCPS painted panel system
Construction materials
  • Flexible wall structures
  • Hard floor and wall structures
  • Masonry
  • Concrete
  • Wood
  • Steel
  • FCPS System
* You can find detailed information about building materials in the registration document.

Functionality

  • FiAM is a one-component, water-based acrylic emulsion.
  • It is fire resistant for up to 5 hours when used in both vertical and horizontal applications in construction joints and works.
  • When exposed to fire, it reacts to form highly insulating charcoal, which slows heat transfer and provides a fire insulation barrier.
  • It is suitably compatible with a variety of materials and is used in FCPS designed to seal large openings in fire-rated floors and walls.
Intumescent Acoustic Sealant FiAM US

Product Information

fischer FiAM is a single-component water-based acrylic emulsion that can provide fire resistance of up to 5 hours when used in both vertical and horizontal applications in construction joints and works. When exposed to fire, it reacts to form a highly insulating charcoal that slows heat transfer and provides a barrier to fire insulation. Tested to BS EN1366-3 and 4, UL 2079 and BS476-20, FiAM is also ETA approved and CE Marked. Prepared to be halogen and solvent-free, FiAM exhibits excellent slump properties and is designed to maintain the sound attenuation index of the structure.

Scope of application

Applications
  • Metallic tubes: 6″ (159 mm)
  • Cable trays: 18″ x 2″ (450 x 50 mm)
  • Cable harnesses: 3″ (80 mm)
  • Linear joints: flexible and rigid wall structural elements
  • Joints between FCPS painted panel system
Construction materials
  • Flexible wall structures
  • Hard floor and wall structures
  • Masonry
  • Concrete
  • Wood
  • Steel
  • FCPS System
* You can find detailed information about building materials in the registration document.

Functionality

  • FiAM is a one-component, water-based acrylic emulsion.
  • It is fire resistant for up to 5 hours when used in both vertical and horizontal applications in construction joints and works.
  • When exposed to fire, it reacts to form highly insulating charcoal, which slows heat transfer and provides a fire insulation barrier.
  • It is suitably compatible with a variety of materials and is used in FCPS designed to seal large openings in fire-rated floors and walls.
Fire Resistant Silicone Sealant FFRS

Product Information

fischer Fire Resistant Silicone Sealant FFRS is a one-piece silicone-based sealant that can provide fire resistance of up to 5 hours when used in construction joints. Tested to BS 476 and EN1366-4, it provides primerless adhesion to a wide range of porous and non-porous surfaces such as glass, anodised and multi-layer aluminium, steel, stainless steel, rigid PVC and concrete.

Scope of application

Applications
  • General construction joints from floor to floor, wall to wall, floor to wall and at the head of the wall are 2″ (50 mm)
  • Interior and exterior applications
Construction materials
  • Concrete
  • Masonry
  • Steel
  • Wood
* You can find detailed information about building materials in the registration document.

Permission

  • ETA-15/0799

Functionality

  • FFRS is a one-piece silicone-based sealant that can provide up to 5 hours of fire resistance when used in construction joints.
  • It provides primer-free adhesion to many different porous and non-porous surfaces.
fischer Rapid Fire Resistant Sealing RFS 640
rfs11
rfs2
rfs3

Product Information

fischer rapid fire resistant sealant RFS 640 is a spray grade one-part water-based fire resistant sealant designed to provide protection against smoke and fire at construction joints and process penetrations in both vertical and horizontal applications. Tested according to ASTM E 814 (UL1479), ASTM E 1966 (UL 2079), ASTM E 2307, ASTM E 84 (UL723), fischer RFS can provide fire resistance up to 3 hours.

Scope of application

Applications
  • Shear wall/slab edge: 8″ (200 mm)
  • Head of wall: 4″ (100 mm)
  • General construction joints: 8″ (200 mm)
  • Cable tray: 24″ x 4″ (600 mm x 100 mm)
  • Steel tubes: 8″ (200 mm)
Construction materials
  • Flexible wall structures
  • Hard floor and wall structures
  • flexible wall
  • Masonry
  • Concrete
* You can find detailed information about building materials in the registration document.

Functionality

  • RFS 640 is a spray-grade one-part water-based, fire-resistant sealant designed to provide smoke and fire protection at construction joints in both vertical and horizontal applications.
  • Provides fire resistance up to 3 hours (according to ASTM E 2307).
  • Meeting the new requirements of ASTM E 1399, RFS 640 has been cycle tested up to 500 times.
  • Suitable for indoor applications and situations where dynamic movement may occur.
  • RFS 640 has also been tested at positive pressure with a minimum of 0.01 inch. (2.5 mPa) water i.e. UL 2079 test standards.
Fire I Barr ElastoSealing FFB-ES

Product Information

FFB-ES is a one-piece water-based acrylic coating designed to provide smoke and fire protection at construction joints in both vertical and horizontal applications. Tested to BS EN1366-4 and BS476-20, the FFB-ES is also ETA approved and CE marked. Developed for use on a 80 kg/m³ rock wool basis, FFB-ES is also halogen and solvent free and exhibits excellent settling and movement properties.

Scope of application

Applications
  • Linear joints in structural elements up to 20″ 500 mm wide
  • floor to floor
  • wall to wall
  • head of the wall
  • under the wall
  • Curtain wall
Construction materials
  • Flexible wall structures
  • Hard floor and wall structures
  • Concrete
  • Masonry
* You can find detailed information about building materials in the registration document.

Permission

  • ETA-15/0203

Functionality

  • FFB-ES is a one-piece water-based acrylic coating designed to provide smoke and fire protection at construction joints in both vertical and horizontal applications.
  • Developed for use on 80 kg/m³ stone wool base.
  • Once applied, it prevents the passage of fire and smoke and can contribute to the acoustic value of a structure between fire-rated partitions providing fire resistance of up to EI 240.
Firestop Mastic UFS 310

Product Information

fischer UFS 310 is a one-part water-based intumescent sealant used to seal construction joints and process penetration in both vertical and horizontal applications. Tested according to ASTM E 814 (UL1479), ASTM E 1966 (UL2079), ASTM E 84 (UL723), fischer UFS 310 can provide fire resistance up to 4 hours. Extensive testing with various process penetrations and joint configurations has made this a universal firestop for many application specifications and is made halogen and solvent free.

Scope of application

Applications
  • Metallic processes: steel and cast iron 20“ (500 mm) – copper 6“ (150 mm)
  • Non-metallic process: PVC 2“ (51 mm open) 3“ (75 mm closed)
  • Isolated operation: 20″ (500 mm)
  • Construction joints: 4″ (100 mm)
  • HVAC 100“ (2500 mm)
  • Cable bundles 4“ (100 mm): distribution channel 27“ (686)
Construction materials
  • Duvar yapıları – lineer derzler
  • Floor structures – linear joints
  • flexible wall
  • Masonry
  • Concrete
* You can find detailed information about building materials in the registration document.

Functionality

  • UFS 310 is a one-part water-based intumescent sealant used to seal construction joints and process penetration in both vertical and horizontal applications.
  • Fire resistance up to 4 hours can be achieved.
  • It shows excellent slump properties, is easy to apply and hardens into a flexible set. Suitable for indoor applications and situations where dynamic movement may occur.
  • UFS 310 is suitable for most application specifications.
Intumescent Graphite Sealant FiGM

Product Information

fischer Intumescent Graphite Sealant FiGM is a one-part water-based flexible acrylic emulsion containing high pressure intumescent graphite used to seal process penetrations in both vertical and horizontal applications. Tested to BS 476 and BS EN1366-3/4, fischer FiGM is also ETA approved and CE Marked for a wide range of applications such as non-metallic pipes, metallic and insulated pipes, MLC pipes, cables and cable bundles, as well as fischer FCPS Painted Panel It can be used with the system.

Scope of application

Applications
  • Metallic tubes: 6″ (159 mm)
  • Non-metallic pipes: 5″ (125 mm)
  • Cable harnesses: 1″ (21 mm)
  • Isolated operation: 6″ (159 mm)
  • Construction joints: 1″ (25 mm)
  • mixed transactions
Construction materials
  • Concrete
  • Masonry
  • Steel
  • Wood
* You can find detailed information about building materials in the registration document.

Permission

  • ETA-14/0381

Functionality

  • FiGM is a one-part water-based flexible acrylic emulsion containing high pressure intumescent graphite used to seal process penetrations in both vertical and horizontal applications.
  • It can expand up to 20 times its own volume and cure to form an elastic, flexible fire insulation.
FireStop Foam

Product Information

fischer FireStop foam is a single-component, self-expanding polyurethane foam designed to self-cure through the absorption of moisture from the atmosphere. The foam has excellent adhesion properties and can adhere to most building materials, once the foam sets it hardens into a semi-rigid structure allowing for low movement and vibration.

Scope of application

Applications
  • Construction joints in walls and floors
  • Insulation and sealing of doors and windows: non-fireproof application
  • Filling material for process penetrations only
  • Filling common voids and cavities: non-refractory application
Construction materials
  • Concrete
  • Masonry
  • Steel as support material
  • Wood as support material
* You can find detailed information about building materials in the registration document.

Functionality

  • FireStop Foam is a single-component, self-expanding polyurethane foam designed to self-cure through the absorption of moisture from the atmosphere.
  • Foam has excellent adhesion properties and can adhere to most building materials. When the foam sets, it hardens into a semi-rigid structure that ensures low movement and vibration.
Foam Barrier System PLUS

Product Information

fischer FireStop Foam Barrier System PLUS is a system consisting of innovative two-component polyurethane expanding foam and highly elastic moldable blocks. Both components can be used together with the system or separately. The quick and easy installation of the fischer Firestop Foam Barrier System PLUS means it can be replaced if necessary and used for harder to reach applications. fischer Firestop Foam Barrier System PLUS is available in UL-version and EN-tested version.

Scope of application

Applications
  • Metallic pipes up to 203 mm (8 inches)
  • Insulated metallic pipes
  • Cable Ducts
  • Cables and wiring harnesses
  • cable trays
  • Mixed multiple penetrations
Construction materials
  • Concrete (walls and floors)
  • Masonry
  • flexible wall
* You can find detailed information about building materials in the registration document.

Functionality

  • FBS is a sound, smoke and fire stopping seal made of two-component polyurethane for hard-to-reach places that expands up to 5 times its volume.
  • FBB are highly elastic moldable blocks.
  • FIB is a glass fiber reinforced intumescent wrap to increase the insulation value of ETA applications.
  • Tested according to ASTM E 814 (UL 1479), ASTM E84 (UL 723) as well as EN 1366-3, EN 13501, Barrier System PLUS provides an easy application that saves time and costs in the facility.
Thermal Protection Wrap
KorumaSargısı1
KorumaSargısı2
KorumaSargısı3

Product Information

fischer TDW is a ceramic-based technology of biodegradable glassy fibers and flexible organic building materials and is designed to enable the compartmentalization of fire-resistant assembly.

Scope of application

  • Cable Trays
  • Metal Services

Functionality

  • fischer TDW is a ceramic-based technology consisting of biodegradable fibers and flexible organic builders and is designed to protect parts of the fire-resistant installation.
  • The unique design of the fischer TDW product allows transportation of services, providing the necessary insulation and preventing temperature rise on the cold side. TDW remains flexible at normal temperature and allows thermal and mechanical movement.
  • Having passed BS EN 1366-3 and BS 476 Part 20 tests, fischer TDW provides integrity and insulation for up to 2 hours.
Intumescent Pillows FiP
Yastık1
Yastık2
Yastık3

Product Information

fischer intumescent pillows (FiP) are a dyed, intumescent mixture of graphite and mineral fibers in a fiberglass PVC coated cloth bag. FiP is suitable for applications where temporary and permanent fire barriers are required.

Scope of application

Applications
  • metal pipes
  • Cables/cable trays
  • electric channel
  • Electrical conduit: Regulation 17 of the IEE Wiring Regulations (BS 7671:2008). For compatibility with the edition

Permission

  • ETA-14/0380
  • DoP: FS-13-2020

Functionality

  • fischer FiP firestop pad is a fire-resistant blend of graphite and mineral fibers covered with glass fiber PVC coated cloth bag.
  • FiP is suitable for applications where temporary and permanent fire barriers are required
  • Having passed BS 476: Part 20 and BS EN 1366-3 tests, FiP also has ETA approval and CE marking. FiP, vertical and horizontal, multiple or
    Provides fire resistance for up to 2 hours in mixed service transitions.
Intumescent Dressing Strip FiWS
FiWS1
FiWS2

Product Information

fischer intumescent Wrap Strip (FiWS) is a flexible, intumescent graphite-based synthetic mortar strip designed for installation around non-metallic pipes, conduits, conduits and cables in both vertical and horizontal applications. Tested to ASTM E 84 (UL723) and ASTM E 814 (UL1479), fischer FiWS can provide up to 4 hours of fire resistance in a wide variety of applications. FiWS is free of asbestos and halogens and is not affected by oil, fungi or vermin.

Scope of application

Applications
  • Non-metallic process: PVC 14″ (355 mm), cPVC 8″ (203 mm), ABS 6″ (152 mm), FRPP 4″ (102 mm)
  • Insulated process: Steel 10″ (254 mm), Iron 10″ (254 mm), Copper 4″ (102 mm), Fiber glass 3″ (75 mm), AB/PVC flexible foam 1″ (25 mm)
  • Cable harnesses: 3″ (76 mm)

Functionality

  • fischer FiWS Firestop Tape is applied around non-metallic pipes and ducts in vertical and horizontal applications.
    It is a flexible, fire-resistant, graphite-based synthetic component wrap.
  • Passing ASTM E 84 (UL723) and ASTM E 814 (UL1479) tests, fischer FiWS is fire resistant for up to 4 hours in different applications.
    Provides durability. FiWS is free of asbestos and halogens and is unaffected by oil, fungus and vermin.
  • FiWS is a pre-positioned or cast-applied firestop solution and can be retrofitted or surface-mounted.
    Can be used with fischer Multi-Purpose Clamp for applications.
  • In large gaps, it can be used with fischer FFSC Firestop Mortar.
Intumescent Pipe Wraps FiPW
FiPW1
FiPW2
FiPW3

Product Information

fischer intumescent Pipe Wrap (FiPW) is a flexible composite strip consisting of a thermoplastic component containing intumescent graphite in a synthetic mortar and enclosed in an outer polyethylene cover. Produced to be wrapped around non-metallic pipes and ducts, FiPW is designed to provide fire resistance for up to 4 hours in the pipe space created during a fire.

Scope of application

Applications
  • non-metallic pipes
  • Polyvinyl Chloride PVC
  • Chlorinated Polyvinyl Chloride cPVC
  • Medium density Polyethylene MDPE
  • High density Polyethylene HDPE
  • Acrylonitrile Butadiene ABS

Functionality

  • fischer FiPW fire resistant wrap, fire resistant thermoplastic material with graphite in the synthetic component inside the outer polyethylene cover
    It is a flexible, composite strip containing
  • Wrapped around non-metallic pipes and ducts, FiPW expands and becomes resistant to fire for up to 4 hours in the pipe space created under the fire.
    Designed to provide durability.
  • Passing BS 476 part 20 and BS EN 1366-3 tests, FiPW is an environmentally friendly product that does not contain asbestos and halogens and is oil,
    It is not affected by fungi, insects and rodents.
  • FiPW can be pre-positioned around the pipe or applied as a bulk solution. fischer FCPS Painted in large gaps
    Use with Panel System or fischer FFSC Firestop Mortar.